Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 167)

149
CATC BTT RAINER 2.11 C HAPTER
User’s Manual
status = Disconnect('00803713BDF0');
Trace("Disconnect result: ", status, "\n");
}
}
HCICatcDecreasePowerRequest
HCICatcDecreasePowerRequest(HCI_Handle)
Return value
• Command Status: Will return after the operation has started
• Command Complete: will return after the operation has completed.
Comments
This command will send LMP_Decr_Power_Req PDU to the remote
device predefined number of times.
Example
Main()
{
Device = '008037163567';
result = HCICatcIncreasePowerRequest(Device);
Trace("HCICatcIncreasePowerRequest: ", result, "\n");
result = HCICatcDecreasePowerRequest(Device);
Trace("HCICatcDecreasePowerRequest: ", result, "\n");
return result;
}
HCICatcDisconnect
HCICatcDisconnect(HCI_Handle,Mode,Timeout))
Parameter Meaning Default Value Comments
HCI_Handle
Parameter Meaning Default Value Comments
HCI_Handle
Mode Values:
0-Tester Detach
1-IUT Detach
2-Link Supervision(Slave)
3- Link Supervision(Master)
Timeout Timeout value (in ms)