Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 121)

103
CATC BTT RAINER 2.20 A PPENDIX A
User’s Manual
Used in Test Cases
A.0.1 CATC_QoS_Response
This command will configure the local device to accept or reject an incoming
LMP_Quality_Of_Service_Request PDU for all connections.
Used in Test Cases
A.7.14 CATC_Read_Encryption_Key_Size
Read the encryption key size.
N_bc According to the Nbc parameter
of LMP_Quality_Of_Service
PDU
Return Events
Command Status: Will return after the operation has started.
Command Complete: Will return after the operation has completed.
Test Case
TP/LIH/BV-39-C
Command Parameters Examples Comments
Mode 1 – Accept (default)
0 – Reject all incoming
LMP_Quality_Of_Servi
ce PDU
2-0xFF reserved
Return Events
Command complete: Will return after the operation has completed.
Test Case
TP/LIH/BV-41-C
Command Parameters Examples Comments
NA
Command Parameters Examples Comments