Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 178)

160
CATC BTT RAINER 2.11 C HAPTER
User’s Manual
Comments
Read the size of the encryption key that is going to be used during an
encryption process
Example
result = HCICatcReadEncryptionKeySize ();
Trace(result);
HCICatcReadRevisionInformation
HCICatcReadRevisionInformation()
Return values
Returns a list with two values: status and revision.
Status (element 0) is one of the following:
• “Success”
• “Failure”
Revision (element 1) is the BTTrainer revision information.
Comments
This command returns the information about the current firmware.
Example
Revision = HCICatcReadRevisionInformation();
if( Revision[0] == "Success")
Trace("Merlin's Wand Revision Info : ", Revision[1], "\n");
HCICatcScoErrorInjection
HCICatcScoErrorInjection(HCI_Handle,TestScenario)
Parameter Meaning Default Value Comments
N/A
Parameter Meaning Value Comments
HCI_Handle
2 Bytes
Test_Scenario
1 Byte
0, 1
2-0xFF -
reserved
0- Performs TP/PROT/ARQ/BV-25-C test case
(Retransmission of DV packet)
1- Performs TP/PROT/ARQ/BV-26-C test case
(Uncorrectable DV packet)