Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 139)

121
CATC BTT RAINER 2.20 A PPENDIX A
User’s Manual
A.11.10 RequestPortStatus
This command will request the status of the PortSettings for the remote device.
A.11.11 SendData
Causes BTTrainer to send data by pipe value to remote device over the specified channel.
A.11.12 SendTest
This command causes BTTrainer to sent a test frame to a remote device over the specified
channel.
A.11.13 SetLineStatus
This command will send the LineStatus command to the remote device. It allows the
RFCOMM user to communicate overrun framing and parity errors to the remote device.
Command Parameters Examples Comments
(HCI/DLCI) (0x0001, 0x02)
Return Events
RequestPortStatus_Complete
RequestPortStatus_Error
Command Parameters Examples Comments
(HCI/DLCI) (0x0001, 0x02)
Data Pipe Pipe1 Data Pipe should be created in
the Data Transfer Manager
Return Events
SendData_Complete
SendData_Failed
Command Parameters Examples Comments
(HCI/DLCI) (0x0001, 0x02)
Return Events
SendTest_Complete
SendTest_Failed
Command Parameters Examples Comments
(HCI/DLCI) (0x0001, 0x02) LineStatus Values: