Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 127)

109
CATC BTT RAINER 2.20 A PPENDIX A
User’s Manual
A.7.28 CATC_Write_Local_Supported_Features
This command will write new local LMP supported features parameters for the device. .
Used in Test Cases
A.7.29 CATC_Write_PIN_Response_Enable
Write the global flag for allowing PINs to be sent to requesting devices during
authentication.
A.8 L2CAP Command Descriptions
A.8.1 ConfigurationResponse
Response to an incoming configuration request.
Command Parameters Examples Comments
LMP_Features Bit Mask list of LMP features as
defined in the Bluetooth 1.1
specification
Return Events
Command Complete: Will return after the operation has completed.
Test Case
TP/PROT/PIC/BV-03-C
TP/PROT/PIC/BV-04-C
Command Parameters Examples Comments
PIN_Response_Enable 0 = disable
1 = enable
Return Events
Command Complete: Will return after the operation has completed.
Command Parameters Examples Comments
Reason “Accept” “Accept” (Default)
“Reject”
“Reject - unacceptable params”
“Reject - unknown options”