Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 67)

49
CATC BTT RAINER 2.20 C HAPTER 5
User’s Manual Command Generator
Informational Commands
Read_Stored_Link_Key BD_ADDR
Read_All_Flag
Read_Voice_Setting N/A
Reset N/A
Set_Event_Filter FilterType
FilterConditionType
Condition
Set_Event_Mask Event_Mask
Write_Authentication_Enable Authentication_Enable
Write_Class_of_Device CoD
Write_Connection_Accept_Timeout Timeout
Write_Current_IAC_LAP IAC_LAP
Write_Encryption_Mode Encryption Mode
Write_Link_Supervision_Timeout HCI_Handle
Timeout
Write_Num_Broadcast_Retransmissions Retransmissions
Write_Page_Activity Page_Scan_Interval
Page_Scan_Window
Write_Page_Scan_Mode Page_Scan_Mode
Write_Page_Scan_Period_Mode Page_Scan_Period_Mode
Write_Page_Timeout Timeout
Write_PIN_Type PIN_Type
Write_Scan_Enable Scan_Enable
Write_Stored_Link_Key BD_ADDR
Link_Key
Write_Voice_Settings HCI_Handle
Voice_Setting
Table 5-6: Unsupported HCI Host Controller & Baseband commands
Commands
Host_Number_Of_Completed_Packets
Read_Transmit_Power_Level
Set_Host_Controller_To_Host_Flow_Control
Write_SCO_Flow_Control_Enable
Table 5-7: Supported HCI Informational commands
Commands Parameters
Read_BD_ADDR N/A
Read_Buffer_Size N/A
Read_Country_Code N/A
Table 5-5: Supported HCI Host Controller & Baseband commands (Continued)
Commands Parameters