A.1.4 change_connection_link_key, A.1.5 change_connection_packet_type, A.1.6 create_connection – Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual User Manual
Page 88
70
CATC BTT
RAINER
2.20
A
PPENDIX
A
User’s Manual
A.1.4 Change_Connection_Link_Key
Used to force both connected devices to generate a new link key.
A.1.5 Change_Connection_Packet_Type
Used to change which packet types can be used for a connection that is currently established.
A.1.6 Create_Connection
Create_Connection will cause the link manager to create an ACL connection to the
Bluetooth wireless device with the BD_ADDR specified by the command parameters.
Return Events
Authentication_Error
Authentication_Complete
Command Parameters
Examples
Comments
HCI_Handle
0x0001
Range: 0x0000-0x0EFF
Return Events
Change_Connection_Link_Key_Error
Change_Connection_Link_Key_Complete
Command Parameters
Examples
Comments
HCI_Handle
0x0001
Packet_Type
0x0008
Range: 0x0000-0x0EFF
0x0008 = DM1
0x0010 = DH1
0x0400 = DM3
0x0800 = DH3
0x4000 = DM5
0x8000 = DH5
Return Events
Change_Connection_Packet_Type_Error
Change_Connection_Packet_Type_Complete
Command Parameters
Examples
Comments
BD_ADDR
010203040506
Enter in HEX as shown.
Packet_Type
Page_Scan_Rep_Mode
Page_Scan_Mode