Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 116)

98
CATC BTT RAINER 2.20 A PPENDIX A
User’s Manual
Used in Test Cases
A.7.3 CATC_Disconnect
This command will start a modified ACL disconnection procedure in order to verify that the
IUT closes the link according to the TP/LIH/BV-04-C test case. During the procedure,
LMP_Detach is sent, and after 3 seconds LMP_Features_Req PDUs is sent.
Used in Test Cases
A.7.4 CATC_Get_Park_Mode
This command gets current firmware mode that defines whether to park a device by
PM_ADDR or by BD_ADDR when HCI_Park_Mode command is received..
Test Case
TP/LIH/BV-35-C
Command Parameters Examples Comments
HCI_Handle
Test_Scenario Values:
0 - Performs
TP/PROT/ARQ/BV-25-C test
case (Retransmissions of DV
packet)
1 - Performs
TP/PROT/ARQ/BV-26-C test
case (Uncorrectable DV packet)
Timeout In ms
Return Events
Command Complete: Will return after the operation has completed.
Disconnection Complete event will return after the operation has completed: LMP_Detach and LMP_Features_Req are
sent
Test Case
TP/LIH/BV-04-C
Command Parameters Examples Comments
N/A
Return Events
Command Complete: Will return after the operation has completed.