Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 60)

42
CATC BTT RAINER 2.20 C HAPTER 4
User’s Manual Profile Wizard
4.7.1 Verifying the Driver’s Installation
To verify that the drivers installed properly, go to the “Device Manager” utility, and display
the properties for the “CATC Bluetooth Trainer PAN virtual NIC” driver under “Network
Adapters.”
Note: The MAC address of the NIC driver is based on the BD address of BTTrainer. The MAC addr will
be rewritten every time the BNEP_Register is executed.
4.7.2 Configuration of Virtual NIC
To configure the network properties of the “CATC Bluetooth Trainer PAN Virtual NIC,”
do the following:
Step 1
Select Start > Settings > Control Panel from the desktop taskbar, then
double-click on “Network and Dial-up Connections” in the Control Panel
window.
Step 2
Locate the “CATC Bluetooth Trainer PAN virtual NIC” Local Area
Connection.
Step 3
Select File > Properties. Now you can change the network settings for your
Bluetooth network connection.