Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 227)

209
CATC BTT RAINER 2.11 C HAPTER
User’s Manual
Return value
Returns a list with two values: status and FlushTimeout
Status (element 0) is one of the following:
• "Success"
• "Failure"
• "Not connected"
• "Failed: Not found"
Comments
This command will write the value for the Flush_Timeout parameter for
the specified connection handle.
Example
Address = '010203040506';
FlushTimeout = 100;
result = HCIWriteAutomaticFlushTimeout
(Address,FlushTimeout);
Trace(result);
HCIWriteConnectionAcceptTimeout
HCIWriteConnectionAcceptTimeout(Interval)
Return value
• “Success”
• “Failure”
• “Invalid parameter”
FlushTimeout
Parameter Meaning Default Value Comments
Interval Number of
0.625-msec
intervals
before the
connection
request times
out.
0x1FA0 (= 5
sec)
Range is 0x0001 to 0xB540 (0.625 msec to 29
sec).
Parameter Meaning Default Value Comments