Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 163)

145
CATC BTT RAINER 2.11 C HAPTER
User’s Manual
Data (element 2) is the raw data received in the transaction. Valid only if
result is “Success”.
Comments
Reads the specified amount of data from an open pipe.
Example
result = ReadPipe("Data1", "Receive", 1024);
if(result[0] == "Success")
{
Trace("Read ", result[1], "bytes:\n");
Trace(result[2]);
}
WritePipe
WritePipe(PipeName, Data)
Return value
• “Success”
• “Failure”
• “Pipe not found”
• “Pipe not open”
• “Not supported”
Comments
Writes data to the specified pipe. Note that only “Receive” pipes can be
written to.
Example
result = WritePipe("Data1", "This is a string written to a
pipe");
result = WritePipe("Data1", '3C7EFFFF7E3C');
result = WritePipe("Data1", 0x01020304);
Parameter Meaning Default Value Comments
PipeName Name of the
data pipe to
open
Data Data to write
to the pipe
This can be a string, integer, list or raw data.