Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 212)

194
CATC BTT RAINER 2.11 C HAPTER
User’s Manual
Return values
Returns a list with two values: status and page scan mode.
Status (element 0) is one of the following:
• “Success”
• “Failure”
Page scan mode (element 1) is the one-byte page scan mode value.
(0=Mandatory page scan mode; 1=Optional page scan mode I; 2=Optional
page scan mode II; 3=Optional page scan mode III.)
Comments
Reads the page scan mode value. This value indicates the mode used for
default page scan.
Example
result = HCIReadPageScanMode();
Trace("HCIReadPageScanMode returned: ", result[0], "\n");
if (result[0] == "Success")
{
Trace("Page scan mode is: 0x", result[1], "\n");
}
HCIReadPageScanPeriodMode
HCIReadPageScanPeriodMode()
Return values
Returns a list with two values: status and page scan period mode.
Status (element 0) is one of the following:
• “Success”
• “Failure”
Page scan period mode (element 1) is the one-byte page scan period mode
value. (0=P0; 1=P1; 2=P2.)
Comments
Reads the page scan period mode value. Each time an inquiry response
message is sent, the Bluetooth device will start a timer, the value of which
depends on the page scan period mode.
Parameter Meaning Default Value Comments
N/A