Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 31)

13
CATC BTT RAINER 2.20 C HAPTER 3
User’s Manual Local Device Manager
This prevents BTTrainer from responding to paging from other Bluetooth devices.
Discoverable
BTTrainer can be placed in discoverable or non-discoverable mode.
• Place BTTrainer in discoverable mode by checking the Discoverable checkbox, and
clicking Apply to apply the settings, or OK to apply the settings and close the Local
Device Manager.
• Place BTTrainer in non-discoverable mode by unchecking the Discoverable checkbox
and clicking Apply to apply the settings, or OK to apply the settings and close the Local
Device Manager.
BTTrainer will not respond to inquiries from other devices while in non-discoverable
mode.
Pairable
BTTrainer can put in pairable or non-pairable mode.
• Put BTTrainer in pairable mode by checking the Pairable checkbox, and clicking Apply
to apply the settings, or OK to apply the settings and close the Local Device Manager.
BTTrainer will accept pairing, or bonding, initiated by a remote device while in pairable
mode.
3.1.4 Inquiry Access Codes
The Inquiry Access Codes section is used to define the Inquiry Access Codes (IACs) that
BTTrainer will scan for when performing an inquiry.
Add an IAC
Step 1
Click Add.
The Add IAC dialog will open.
Step 2
Enter an IAC in the text box.
Values must be entered in hex, and they must be between 9E8B00–9E8B3F.
Step 3
Click OK.
The new value will be added to the list of IACs in the Local Device Manager.
Step 4
Click Apply to apply the settings, or click OK to apply the settings and close
the Local Device Manager.
Modify an IAC
Step 1 Select the IAC that you want to modify.
Note: You cannot modify the GIAC (0x9E8B33).
Step 2 Click Modify.
The Modify IAC dialog will open.