Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 253)

235
CATC BTT RAINER 2.11 C HAPTER
User’s Manual
Return value
• “Success”
• “Failure”
• “Not connected”
• “Timed Out”
Comments
Submits a request to change the port settings on a particular RFCOMM
connection.
Example
result = RFOpenClientChannel(Device, 1);
DLCI = result[1];
if(result[0] == "Success")
{
status = RFRequestPortSettings("CONNECTED_DEVICE", DLCI,
"57600", ["RF_DATA_BITS_8"], ["RF_FLOW_CTRL_NONE"], 11,
13);
Trace("RFRequestPortSettings returned: ", status,
"\n\n");
}
RFRequestPortStatus
RFRequestPortStatus(Address, DLCI)
Xon Number indi-
cating the
XON charac-
ter
Xoff Number indi-
cating the
XOFF charac-
ter
Parameter Meaning Default Value Comments
Address Bluetooth
address of
device
Can use “CONNECTED_DEVICE” to request
the port status on a master RFCOMM connec-
tion. Note that this will work only if exactly one
device is connected via RFCOMM.
DLCI Data link con-
nection identi-
fier
The DLCI is returned by RFOpenClientChan-
nel()
Parameter Meaning Default Value Comments