A.7.13 catc_qos, A.7.12 catc_page_scan_mode_request – Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual User Manual
Page 120
102
CATC BTT
RAINER
2.20
A
PPENDIX
A
User’s Manual
Used in Test Cases
A.7.12 CATC_Page_Scan_Mode_Request
This command will send LMP_Page_Scan_Mode_Req PDU to the remote device.
Used in Test Cases
A.7.13 CATC_Qos
This command will send LMP_Quality_Of_Service PDU over ACL connection according
to the test case.
Return Events
Command Status: Will return after the operation has started.
Command Complete event will return after the operation has completed: LMP_Page_Mode_Req PDU was sent
Test Case
Description
TP/LIH/BV-65-C
Need to send LMP_Page_Mode_Req PDU
TP/LIH/BV-66-C
Need to send LMP_Page_Mode_Req PDU
Command Parameters
Examples
Comments
HCI_Handle
.
PagingScheme
PagingSchemeSettings
Return Events
Command Status: Will return after the operation has started.
Command Complete event will return after the operation has completed: LMP_Page_Scan_Mode_Req PDU was sent
Test Case
Description
TP/LIH/BV-70-C
Need to send LMP_Page_Scan_Mode_Req PDU
TP/LIH/BV-71-C
Need to send LMP_Page_Scan_Mode_Req PDU
Command Parameters
Examples
Comments
HCI_Handle
Poll_Interval
According to the poll_interval
parameter of
LMP_Quality_Of_Service PDU