A.3.32 write_automatic_flush_timeout, A.3.33 write_class_of_device, A.3.34 write_connection_accept_timeout – Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual User Manual
Page 107
89
CATC BTT
RAINER
2.20
A
PPENDIX
A
User’s Manual
A.3.32 Write_Automatic_Flush_Timeout
A.3.33 Write_Class_of_Device
Write_Class_of_Device will write the value for the Class_of_Device parameter, which is
used to indicate its capabilities to other devices.
A.3.34 Write_Connection_Accept_Timeout
Write_Connection_Accept_Timeout will write the value for the
Connection_Accept_Timeout configuration parameter, which allows BTTrainer to
automatically deny a connection request after a specified period has occurred, and to refuse
a new connection.
Command Parameters
Examples
Comments
HCI_Handle
Flush_Timeout
Command Parameters
Examples
Comments
CoD
0x000000
Class of Device for the device
Return Events
Write_Class_of_Device_Complete
Write_Class_of_Device_Error
Command Parameters
Examples
Comments
Timeout
0x00
Connection Accept Timeout
measured in Number of
Baseband slots.
Interval Length = N * 0.625
msec (1 Baseband slot)
Range for N: 0x0001 – 0xB540
Time Range: 0.625 msec - 29
seconds
Default: N = 0x1FA0 Time = 5
Sec
Return Events
Write_Connection_Accept_Timeout_Complete
Write_Connection_Accept_Timeout_Error