A.7.9 catc_modify_beacon, A.7.10 catc_override_remote_features_check, A.7.11 catc_page_mode_request – Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual User Manual
Page 119
101
CATC BTT
RAINER
2.20
A
PPENDIX
A
User’s Manual
A.7.9 CATC_Modify_Beacon
This command will send LMP_Modify_Beacon PDU to notify parked devices about beacon parameter change.
Used in Test Cases
A.7.10 CATC_Override_Remote_Features_Check
This command will override remote device LMP feature check in case local device needs to initiate a procedure that remote
device doesn't support. Remote device LMP features are set in the LMP_Features_Req PDUs that are exchanged during
the connection establishment. Example of the procedures are Sniff, Park, and Hold.
A.7.11 CATC_Page_Mode_Request
This command will send LMP_Page_Mode_Req PDU to the remote device.
Command Parameters
Examples
Comments
HCI_Handle
BeaconMaxInterval
BeaconMinInterval
Return Events
Command Status: Will return after the operation has started.
Command complete: Will return after the operation has completed: LMP_Modify_Beacon PDU was sent.
Test Case
TP/LIH/BV-25-C
Command Parameters
Examples
Comments
HCI_Handle
Return Events
Command complete: Will return after the operation has completed.
Command Parameters
Examples
Comments
HCI_Handle
PagingScheme
PagingSchemeSettings