Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 53)

35
CATC BTT RAINER 2.20 C HAPTER 4
User’s Manual Profile Wizard
Step 4
At this point, you may transfer files to the root folder from the remote device.
4.3.4 Emulate Device: HCRP Server
This section explains how to use Profile Wizard to set up BTTrainer to emulate an HCRP
server.
Step 1
Complete Steps 1-4 in Section 4.3, “Emulating Devices” on page 32.
The Printer Emulation screen will open.
Step 2
You can now do any of the following:
• Change the folder in which transferred files are stored: Click the
Change... button to open the Browse for Folder dialog. Select the folder
in which you want transferred files to be stored. Click OK to confirm the
change.
• Change the maximum size for data credits: Click the Change maximum
size... button to open the Change Data Credit Maximum Size dialog. Type
in a new credit size, in bytes. Click OK to confirm the change.
• Set the LPT status bits: Check or uncheck the status bits to change their
settings.
Paper empty: Checked = 1 = Paper empty; Unchecked = 0 = Paper not
empty
Selected: Checked = 1 = Selected; Unchecked = 0 = Not selected
Error: Checked = 0 = Error; Unchecked = 1 = No error
• Change or add a printer ID string: Click Change printer ID string... to
open the Change Printer ID String dialog. Enter strings as KEY:VALUE
pairs or vendor-specific pairs. Individual strings must be separated by
semicolons. Click OK to confirm changes.
• Send a file to the printer: Click the Print... button to access the Open
dialog. By default, the file that was most recently transferred to the HCRP
server will be selected; however, you may browse to a different file, if you
wish. Click Open to print the file.
4.3.5 Emulate Device: Headset
BTTrainer can be configured to emulate a wireless device that conforms to the Bluetooth
Headset profile. The following steps show how to set up BTTrainer as a Headset device and
connect to it with a remote Bluetooth headset.
Step 1
Complete Steps 1-4 in Section 4.3, “Emulating Devices” on page 32.
The Headset Emulation screen will open, indicating that BTTrainer has been
configured to emulate a device that supports the Headset profile and is
awaiting connection from a device.