Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 295)

277
CATC BTT RAINER 2.11 C HAPTER
User’s Manual
HCICatcInquiry
HCICatcInquiry(TestScenario, NumberOfTimes)
TestScenario
Return value
• "Success"
• "Failure"
• "Invalid Parameter"
• "Timed out"
Comments
This command supports TCI functionality that requires BtTrainer to initiate
a modified Inquiry procedure to the IUT, as required by the Bluetooth
Baseband test cases
Used in Test Cases
Example
result = HCICatcInquiry(TestScenario, NumberOfTimes);
Trace(result);
Parameter Meaning Default Value Comments
TestScenario
NumberOfTimes
0x00 Exit the Inquiry test mode
0x01 Perform Inquiry procedure according to TP/PHYS/INQ/BV-10-C test cases
Test Case Description
TP/PHYS/INQ/BV-10-C Inquiry response/79 channels