Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 306)

288
CATC BTT RAINER 2.11 C HAPTER
User’s Manual
RxFrequency,
PowerControlMode,
PollPeriod,
PacketType,
NumOfPackets,
TimeLength,
Data,
ErrorType,
ErrorMask,
TxJitter );
Trace("HCICatcTestControlMaster: ", result, "\n");
return result;
HCICatcEnterTestMode
HCICatcEnterTestMode(Address)
Return value
• “Success”
• “Failure”
• "Note found"
• "Not connected"
“Comments
This command will start a modified ACL disconnection procedure in order
to verify that the IUT closes the link according to the TP/LIH/BV-04-C test
case. During the procedure, LMP_Detach is sent, and after 3 seconds
LMP_Features_Req PDUs is sent.
Parameter Meaning Default Value Comments
Address Bluetooth
address of
remote device