Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 118)

100
CATC BTT RAINER 2.20 A PPENDIX A
User’s Manual
A.7.7 CATC_MaxSlot
This command will send LMP_Max_Slot PDU to the remote device.
Used in Test Cases
A.7.8 CATC_MaxSlot_Response
This command will start a special Max Slot request/response procedure.
Used in Test Cases
Command Parameters Examples Comments
HCI_Handle
MaxSlot
Return Events
Command Status: Will return after the operation has started.
Command complete: Will return after the operation has completed: LMP_Max_Slot PDU was sent.
Test Case
TP/LIH/BV-64-C
Command Parameters Values Description
HCI_Handle
Action
Event
0=Reject
1=Accept
0=EnableCatcMaxSlot
RequestEvent
1=DisableCatcMaxSlot
RequestEvent
Action=0/Event=0: Will reject all incoming
LMP_Max_Slot_Req PDUs & generate
HCI_CatcMaxSlotRequestEvent for every
PDU
Action=1/Event=0: Will accept all incoming
LMP_Max_Slot_req PDUs and generate
HCI_CatcMaxSlotRequestEvent for every
PDU Action=1/Event=1: Will restore
everything to the pre-script state
Return Events
Command Status: Will return after the operation has started.
Command complete: Will return after the operation has completed: LMP_Max_Slot PDU was sent.
Test Case
TP/LIH/BV-61-C
TP/LIH/BV-64-C