Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 154)

136
CATC BTT RAINER 2.20 A PPENDIX A
User’s Manual
A.16.8 CATC_PageScan
Enter modified Page Scan mode.
A.16.9 CATC_Inquiry
Initiate a modified Inquiry procedure to the IUT.
A.16.10 CATC_InquiryScan
Enter modified Inquiry Scan mode.
Note: This command turns off the scan enable mode. You should call Write_Scan_Enable to restore the
value.
Command Parameters Examples Comments
TestScenario .
ClockOffset
Return Events
Command Status: Will return after the operation has started.
Command Complete: Will return after the operation has completed.
Command Parameters Examples Comments
TestScenario
Number of Times
Return Events
Command Status: Will return after the operation has started.
Command Complete: Will return after the operation has completed.
Command Parameters Examples Comments
TestScenario
ClockOffset
Inquiry
Return Events
Command Status: Will return after the operation has started.
Command Complete: Will return after the operation has completed.