Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 224)

206
CATC BTT RAINER 2.11 C HAPTER
User’s Manual
HCISniffMode
HCISniffMode(Address, MaxInterval, MinInterval, Attempt,
Timeout)
Return value
• “Success”
• “Failure”
• “Failed: Device not found”
• “Not connected”
Comments
Enters Sniff mode with parameters as specified.
Example
Device = '010203040506';
result = HCISniffMode(Device, 0xFFFF, 100, 0x3FF6, 0x7FFF);
Trace("HCISniffMode result is: ", result, "\n");
Parameter Meaning Default Value Comments
Address Bluetooth
address of
device in
question
MaxInterval Maximum
number of
0.625-msec
intervals
between sniff
periods.
Range is 0x0001 to 0xFFFF
(0.625 msec to 40.9 sec).
MinInterval Minimum
number of
0.625-msec
intervals
between sniff
periods.
Range is 0x0001 to 0xFFFF
(0.625 msec to 40.9 sec).
Attempt Number of
receive slots
for sniff
attempt.
Range is 0x0001 to 0x7FFF
(0.625 msec to 20.5 sec).
Timeout Number of
receive slots
for sniff time-
out.
Range is 0x0001 to 0x7FFF
(0.625 msec to 20.5 sec).