Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 262)

244
CATC BTT RAINER 2.11 C HAPTER
User’s Manual
Comments
This command can be called after a TCS channel is opened. It sends an
INFORMATION TCS message with a called party number.
Example
result = TCSSendInfoMessage("4088447081");
Trace("TCSSendInfoMessage result : ", result, "\n");
if( result != "Success")
return result;
#########################################################
# Tested TCS Call initiation, information sending, #
# and Call clearing #
#########################################################
Main()
{
#Device = '838010AC0008';
Device = DoInquiry();
Trace(Device, "\n");
result = Connect(Device[0]);
Trace("Connection result : ", result, "\n");
if( result != "Success")
return result;
Sleep(1000);
result = TCSRegisterProfile();
Trace("TCSRegisterProfile result : ", result, "\n");
if( result != "Success")
return result;
Sleep(1000);
result = TCSOpenChannel(Device[0]);
Trace("TCSOpenChannel result : ", result, "\n");
if( result != "Success")
return result;
Sleep(1000);
result = TCSStartCall();
Trace("TCSStartCall result : ", result, "\n");
if( result != "Success")
return result;
Sleep(1000);