Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 305)

287
CATC BTT RAINER 2.11 C HAPTER
User’s Manual
Used in Test Cases
Example
Device = '008037163567';
TestScenario = 0x07;
HoppingMode = 1;
TxFrequency = 0;
RxFrequency = 0;
PowerControlMode = 0;
PollPeriod = 0x40;
PacketType = ["DH1"];
NumOfPackets = 100;
TimeLength = 0;
Data = 0x010203;
ErrorType = 0x0000;
ErrorMask = 0;
TxJitter = 0xFE;
result = HCICatcTestControlMaster(
Device,
TestScenario,
HoppingMode,
TxFrequency,
Test Case Description
TP/PHYS/FRE/BV-01
-C 79 channel hopping sequence. Tester transmits POLL packets every
master-to-slave slot. Clock is set to include wrap-around
TP/PHYS/FRE/BV-03
-C 23 channel hopping sequence. Tester transmits POLL packets every
master-to-slave slot. Clock is set to include wrap-around
TP/PHYS/TRX/BV-02
-C Slave Tx timing. Random 0-10 us jitter is added to the Master Tx tim-
ing
TP/PHYS/TRX/BV-02
-E Slave Tx timing. Random 0-10 us jitter is added to the Master Tx tim-
ing
TP/PROT/COD/BV-1
1-C Erroneous slave address. AM_ADDR is corrupted.
TP/PROT/COD/BV-1
2-C Correctable packet header – FEC13
TP/PROT/COD/BV-1
4-C Correctable error HV1 payload – FEC13
TP/PROT/COD/BV-1
6-C Correctable error DM1 payload – FEC23