Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 34)

16
CATC BTT RAINER 2.20 C HAPTER 3
User’s Manual Local Device Manager
Step 3
Enter a PIN code in the second text box. Values must contain from 1-16
characters.
Step 4
Click OK.
The new address and PIN code will be added to the list in the Local Device
Manager.
Step 5
Click Apply to apply the settings, or click OK to apply the settings and close
the Local Device Manager.
Modify a PIN Code
Step 1
Click Modify.
The Modify PIN Code dialog will open.
Step 2
Edit the PIN code in the text box. Values must contain from 1-16 characters.
Step 3 Click OK.
The new value will be displayed in the list in the Local Device Manager.
Step 4
Click Apply to apply the settings, or click OK to apply the settings and close
the Local Device Manager.
Delete a PIN Code
Note: The default PIN code cannot be deleted while BTTrainer is using security mode 3.
Step 1
Select the PIN code that you want to delete.
Step 2
Click Delete.
The value will be removed from the list of PIN codes in the Local Device
Manager.
Step 3
Click Apply to apply the settings, or click OK to apply the settings and close
the Local Device Manager.
3.2.4 Link Keys
If BTTrainer has stored any link keys, you may delete them via the Local Device Manager.
To delete stored link keys:
Step 1
Click the Delete All Stored Link Keys button.
Step 2
Click OK in the pop-up message box to confirm the deletion.