Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 24)

6
CATC BTT RAINER 2.20 C HAPTER 2
User’s Manual Getting Started
2.4 Application Layout
The BTTrainer window is made up of the following:
• The Main window, where the primary tools are run: Profile Wizard, Command Genera-
tor, and Script Manager.
• Profile Wizard -- A simple, easy-to-use tool that guides you through the process of
establishing connections and generating traffic between BTTrainer and other
Bluetooth wireless technology devices.
• Command Generator -- A tool that allows Bluetooth commands to be issued in
any chosen sequence.
• Script Manager -- A notepad-like tool for writing and launching scripts that cause
BTTrainer to generate traffic.
Note: When switching between Profile Wizard, Command Generator and Script Manager, all connections
that have been established between BTTrainer and another Bluetooth device should be closed.
However, expert users may choose to leave the connections open. If a connection is left open and you
attempt to switch tools, BTTrainer will prompt you to close the connections. Choosing Disconnect All
will close the connections. Choosing Cancel will leave the connections open, but some commands
might not work properly in the other tool. When switching to Profile Wizard, any open connections
must be closed.
• The Device Status window is on the left side of the interface. It contains two tabs:
Device List, and Connections.
• Device List - Displays a list of devices that BTTrainer has discovered. It also
contains information about the devices found, such as the Bluetooth address, the
Main
Window
Log
Window
Device
Status
Window