Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 3)

iii
CATC BTT RAINER 2.20
User’s Manual
C
ONFORMANCE
S
TATEMENTS
FCC Conformance Statement
This equipment has been tested and found to comply with the limits for both a Class A and
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated
in a commercial or residential environment. This equipment generates, uses, and can radiate
radio frequency energy, and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. The end user of this
product should be aware that any changes or modifications made to this equipment without
the approval of CATC could result in the product not meeting the Class A or Class B limits,
in which case the FCC could void the user's authority to operate the equipment.
Important Notice
This equipment complies to FCC ID KH7BT004APA-X. To comply with FCC RF exposure
requirements (sections 1.1307 and 1.310 of the Rules) only the antenna supplied by CATC
must be used for this device. The antenna must be located at least 20 centimeters away from
all persons.
EU Conformance Statement
This equipment complies with the R&TT Directive 1999/5/EC. It has been tested and
found to comply with EN55022:1998 Class B (EN61000-3-2:1998, EN61000-3-3:1995),
EN55024:1998 (EN61000-4-2:1995, EN61000-4-3:1995, EN61000-4-4:1995,
EN61000-4-5:1995, EN61000-4-6:1995, EN61000-4-11:1994), and EN60950:1999. The
transmitter module was tested and found to comply with ETS 300 328 (1997).