Rainbow Electronics W90P710CDG - Manual (Page 149)

W90P710CD/W90P710CDG
Publication Release Date: September 19, 2006
- 149 - Revision B2
31 30 29 28 27 26 25 24
Reserved
23 22 21 20 19 18 17 16
Reserved
15 14 13 12 11 10 9 8
MRPCC
7 6 5 4 3 2 1 0
MRPCC
BITS DESCRIPTIONS
[31:16] Reserved -
[15:0] MRPCC
The MAC Receive Pause Current Count shows the current value of
that down count timer. If a new PAUSE control frame is received
before the timer count down to zero, the new operand of the PAUSE
control frame will be stored into the down count timer and the timer
starts count down from the new value.
MAC Remote Pause Count Register (MREPC)
The EMC of W90P710 supports the PAUSE control frame transmission. After the PAUSE control
frame is transmitted out completely, a timer starts to count down from the value of operand of the
transmitted PAUSE control frame. The MREPC shows the current value of this down count timer. The
MREPC is read only and write to this register has no effect.
REGISTER ADDRESS R/W DESCRIPTION RESET VALUE
MREPC 0xFFF0_30C4 R MAC Remote Pause Count Register 0x0000_0000
31 30 29 28 27 26 25 24
Reserved
23 22 21 20 19 18 17 16
Reserved
15 14 13 12 11 10 9 8
MREPC
7 6 5 4 3 2 1 0
MREPC