Nortel Networks NN43001-563 - Manual (Page 58)

58 System description
2 The metal clip should be pulled up and the new CFlash card should
be kept in the right position (see
Figure 13 "CFlash card with metal
clip up" (page 58) ).
3 Ensure that force is applied equally at both ends of the CFlash card
before pushing it in (see
Figure 13 "CFlash card with metal clip up"
(page 58) ).
Figure 13
CFlash card with metal clip up
4 Gently insert the CFlash, so that the flash is fully in contact with the
connectors on the drive.
5 Push the metal clip down so that the CFlash is locked in (see Figure
14 "CFlash card with metal clip down" (page 58) ).
Figure 14
CFlash card with metal clip down
—End—
WARNING
The Media Card 32-port trunk card requires the IP Trunk 3.01
(and later) application software (exec file) to be present on the C:/
drive (CFlash card) in order to run the IP Trunk 3.01 (and later)
application.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.