Nortel Networks NN43001-563 - Manual (Page 362)

362 TM 3.1 OA and M using TM 3.1 applications
Disable the indicated IP trunk card when idle
To disable the indicated IP trunk card when idle in LD 32, use the following
command:
DISI l s c Disable the indicated IP trunk card
when idle, where: l = loop,
s = shelf, c = card
Enable an indicated IP trunk card
To enable an indicated IP trunk card in LD 32, use the following command:
ENLC l s c Enable the indicated IP trunk card,
where: l = loop, s = shelf,
c = card
Disable an indicated IP trunk card port
To disable an indicated IP trunk card port in LD 32, use the following
command:
DISU l s c u Disable the indicated ITG unit
(port), where: l = loop, s = shelf,
c = card, u = unit
Enable an indicated IP trunk card port
To enable a indicated IP trunk card port in LD 32, use the following
command:
ENLU l s c u Enable the indicated ITG unit
(port), where: l = loop, s = shelf,
c = card
Display IP trunk card ID information
To display the IP trunk card ID in LD 32, use the following command:
IDC l s c Display the card ID for the IP trunk
card, where: l = loop,
s = shelf, c = card
Display IP trunk card status
To display the status of a indicated IP trunk card in LD 32, use the following
command:
STAT l s c Display the status of the indicated
IP trunk card, where: l = loop,
s = shelf, c = card
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.