Nortel Networks NN43001-563 User Manual
Page 217
Configure IP Trunk 3.01 (and later) data
217
Prompt
Response
Description
DNUM
x
Device Number for I/O ports, where:
x = 0 – 15
PORT
x
Port number for MSDL card, where:
x = 0 – 3
DES
IP TRUNK
16 character designator is "IP TRUNK" Specific description
if more than one IP Trunk 3.01 (and later) route exists.
...
USR
User.
ISLD
Dedicated Mode ISDN Signaling Link.
IFC
Interface type for D-channel:
SL1
Meridian Customer Defined Network (MCDN)
ESGF
ESIG interface with GF platform (QSIG)
ISGF
ISIG interface with GF platform (QSIG)
The ESGF and ISGF responses are allowed if the QSIG
and QSIG GF packages are both equipped.
The IFC entry must match the protocol entered in TM 3.1
(and later) Node Properties, Card Configuration, Protocol
pull-down menu.
ISLM
xxx
Integrated Service Signaling Link Maximum CHIDs,
where:
x = 1 – 382
ISLM is the maximum number of ISL trunks controlled by
the D-channel. There is no default value.
BPS
(64000)
64000 is the default and is required for the IP Trunk 3.01
(and later) DCHIP.
PARM
(RS422 DTE)
The RS-422 parameters are established with switch
settings on the MSDL card. This prompt is used to verify
those settings prior to enabling the card.
RCAP
Remote Capabilities
ND2
Network Name Display type 2 signaling. All nodes must
use same RCAP.
...
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563
01.01
Standard
Release 5.0
30 May 2007
Copyright © 2007, Nortel Networks
.