Figure 126 remote node properties general tab – Nortel Networks NN43001-563 User Manual
Page 330
![background image](/manuals/194294/330/background.png)
330
Provisioning IP Trunk 3.01 (and later) in TM 3.1
WARNING
If a remote node has IP Peer H.323 Gateway capability, do
not use QoS monitoring unless that node is also running IP
Trunk 3.01 (and later). No other IP Peer H.323 Gateways
support IP Trunk 3.01 (and later)-formatted QoS.
Unless both sides support IP Trunk 3.01 (and later) and
have it enabled, calls cannot be made to that node.
11
Click Apply. See
Figure 126 "Remote Node Properties – General
Figure 126
Remote Node Properties General tab
12
Click the Digits dialed tab. The Add button is inactive until values
are entered in the Dial plan digits field.
On the Digits dialed tab, enter the dial plan information for this node.
13
From the Dial Plan drop-down list, select the correct dial plan/type of
number selection. See
Figure 127 "Select the Dial Plan" (page 331)
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563
01.01
Standard
Release 5.0
30 May 2007
Copyright © 2007, Nortel Networks
.