Figure 66 devices.txt file, Table 50 format of devices.txt file – Nortel Networks NN43001-563 User Manual

Page 278

278

Install and configure IP Trunk 3.01 (and later) node

Figure 66
Devices.txt file:

For each IP trunk card in each monitored IP Trunk 3.01 (and later)
node, add a line consisting of three fields separated by spaces. See

Table 50 "Format of Devices.txt file" (page 278)

. Enter the first line

beginning underneath the last line that begins with a "#". Lines
beginning with "#" are comments and not processed. Do not begin
any of the lines defining IP Trunk 3.01 (and later) devices with "#".

Table 50
Format of Devices.txt file

Device Type

IP Address

Device Name

ITG

xxx.xxx.xxx.xxx

Site_Leader_0

Site_Leader_1

Site_Follower_2

The Device Name cannot contain any spaces. Use a descriptive name
for the system site where the IP Trunk 3.01 (and later) node is located.

Click File > Save.

In the Alarm Notification Run Options window, click OK.

Nortel Communication Server 1000

IP Trunk Fundamentals

NN43001-563

01.01

Standard

Release 5.0

30 May 2007