Nortel Networks NN43001-563 - Manual (Page 296)

296 Provisioning IP Trunk 3.01 (and later) in TM 3.1
10 Enter the Directory Numbers and HLOC obtained from the system
provisioning.
The Features tab and the Numbering Plans tab are related to
system provisioning. They are not used for IP Trunk 3.01 (and later).
11 Click OK.
The New – (Customer x) Properties window closes.
12 Click OK in the System Properties window.
The window closes and the TM 3.1 Navigator window is displayed.
—End—
Change an existing system
Follow the steps in Procedure 43 "Changing an existing system" (page 296)
to make changes to an existing system.
Procedure 43
Changing an existing system
Step Action
1 Log in to the TM 3.1 Navigator.
The window displays two sections – Services and Sites. See Figure
67 "OTM Navigator" (page 282) .
2 In the Site where the system is located, click the system to be
changed.
3 Right-click the system and from the drop-down list, select
Properties.
Alternatively, from the upper menu, click File > Properties.
The System Properties window opens. See Figure 85 "System
Properties window" (page 297) .
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.