Nortel Networks NN43001-563 User Manual

Page 35

Hardware components for IP Trunk 3.01 (and later)

Nortel Netgear RM356 Modem Router or equivalent is required for remote
support and must be ordered separately from retail outlets.

Inspect the IPE module to determine if it is equipped with non-removable
Molded Filter Connectors on the I/O Panel. For Large Systems
manufactured during the period of 1998-1999 and shipped in North
America, the IPE modules have the NT8D81BA Backplane to I/O Panel
ribbon cable assembly with a non-removable Molded Filter Connector. If
the TLAN subnet connection is 10BaseT use the NT8D81BA Backplane
to I/O Panel ribbon cable assembly, for a 100BaseT connection use the
NT8D81AA ribbon cable.

Table 3 "Hardware components for the Media Card 32-port trunk" (page 34)

lists the hardware components included in the IP Trunk 3.01 (and later)
packages for new installations.

Table 4 "Extra components for IP Trunk 3.01 (and later) trunk cards" (page
35)

lists the extra components used by both the Media Card 32-port trunk

card and the ITG-Pentium 24-port trunk cards.

Table 4
Extra components for IP Trunk 3.01 (and later) trunk cards

Component

Product codes

MSDL DCH cable (included in Large System package):

6 ft

NTND26AA

18 ft

NTND26AB

35 ft

NTND26AC

50 ft

NTND26AD

50 ft MSDL DCH Extender cable

NTMF04AB

10 ft Inter cabinet cable NTCW84KA to SDI/DCH cable

NTWE04AC

1 ft Intra cabinet cable NTCW84KA to SDI/DCH cable

NTWE04AD

Shielded four-port SDI/DCH cable for the NTAK02BB SDI/DCH
card (included in Small System package)

NTAK19FB

PC Maintenance cable (for faceplate RS-232 maintenance port
to local terminal access)

NTAG81CA

Maintenance Extender cable

NTAG81BA

Large Systems filter connector

50 pin I/O Panel Filter Connector Block with ITG specific
filtering for 100BaseTX (included in Large Systems package)

NTCW84JA

Nortel Communication Server 1000

IP Trunk Fundamentals

NN43001-563

01.01

Standard

Release 5.0

30 May 2007