Nortel Networks NN43001-563 - Manual (Page 322)

322 Provisioning IP Trunk 3.01 (and later) in TM 3.1
Figure 114
Access the Dialing Plan window
The ITG Dialing Plan window opens. If it is a new node, the Dialing
Plan window is blank. See
Figure 115 "ITG Dialing Plan window"
(page 322) .
Figure 115
ITG Dialing Plan window
2 To add a new remote node, click Configuration > Add Remote
Node. A remote node is an entry in the dialing plan table that
represents a device to be reached by provisioning on the IP trunk
card. See
Figure 115 "ITG Dialing Plan window" (page 322) .
In IP Trunk 3.01 (and later), an address that does not exist in this
provisioning is routed to the Gatekeeper, which, at a minimum,
resolves the destination.
This enables interworking of legacy ITG Trunk applications with
H.323 gateways.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.