Nortel Networks NN43001-563 - Manual (Page 353)

Retrieve and add an IP Trunk 3.01 (and later) node for maintenance and diagnostic purposes 353
The Retrieve control dialog box displays the results of the retrieval.
The node properties, card properties and dialing plan are retrieved
from the Leader card.
8 Click Close when the download is complete.
9 Refresh the card status and check that the cards in the new node
are responding.To determine the IP trunk card status, in the IP
Telephony Gateway – ISDN IP Trunk window click View > Refresh
> All.
Look at the IP trunk card in the bottom window and see what is
under the title "Card State". See
Figure 143 "Determine IP trunk
card status" (page 353) .
Figure 143
Determine IP trunk card status
—End—
Retrieve and add an IP Trunk 3.01 (and later) node for maintenance
and diagnostic purposes
Follow the steps in Procedure 57 "Creating a 'dummy" IP Trunk 3.01
(and later) node" (page 354) to create a "dummy" IP Trunk 3.01 (and
later) node for retrieving and viewing the real IP Trunk 3.01 (and later)
node configuration, without overwriting the existing IP Trunk 3.01 (and
later) configuration data for an existing node in the TM 3.1 IP Trunk 3.01
(and later) database. Retrieving the real IP Trunk 3.01 (and later) node
configuration to the "dummy" node is useful in the following cases:
• isolating IP Trunk 3.01 (and later) node configuration faults
• determining which copy of the database is correct, so that the required
direction of database synchronization can be determined:
— transmit the TM 3.1 IP Trunk 3.01 (and later) database to the IP
Trunk 3.01 (and later) node
— retrieve the database from the IP Trunk 3.01 (and later) node for the
TM 3.1 IP Trunk 3.01 (and later) node
Add the dummy node manually or by retrieving the IP Trunk 3.01 (and later)
node configuration data from an existing IP Trunk 3.01 (and later) node.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.