Nortel Networks NN43001-563 - Manual (Page 417)

Replace an IP trunk card 417
—End—
Determine IP trunk card software release
Follow the steps in Procedure 71 "Determining the IP trunk card software
release" (page 417) to determine the current software release on the IP
trunk card.
Procedure 71
Determining the IP trunk card software release
Step Action
1 In the IP Telephony Gateway window in TM 3.1, double-click the
replacement IP trunk card to open the Card properties window.
Leave the default selection of the IP trunk card in the Card
Properties window and click the Configuration tab.
2 Check that the "S/W release" shows the latest recommended
software version.
3 If the replacement IP trunk card requires a software upgrade, refer to
"Software upgrade mechanisms" (page 412) .
—End—
Transmit card properties and dialing plan
It is not necessary to disable IP trunk cards when transmitting a dialing
plan alone.
Follow the steps in Procedure 72 "Transmitting IP trunk card properties
and dialing plan" (page 417) to transmit IP trunk card properties and the
dialing plan.
Procedure 72
Transmitting IP trunk card properties and dialing plan
Step Action
1 In the IP Telephony Gateway window, select the replacement IP
trunk card.
2 Click menu Configuration > Synchronize > Transmit.
The ITG – Transmit Options window appears.
3 Select the Transmit to selected cards radio button. Check the
Card properties and Dialing plan boxes only.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.