Nortel Networks NN43001-563 - Manual (Page 384)

384 OA and M using the ITG shell CLI and overlays
Command Function
IDC l s c Print the Card ID information for the described
IP trunk card, where:
l = loop, s = shelf, c = card
STAT l s c Print the system software status of the
indicated IP trunk card where:
l = loop, s = shelf, c = card
STAT l s c u Print the system software status of the
indicated unit, where:
l = loop, s = shelf, c = card, u = unit
Disable the indicated IP trunk card
To disable the indicated IP trunk card in LD 32, use the following command:
DISC l s c Disable the indicated IP trunk card,
where:
l = loop, s = shelf, c = card
Disable the indicated IP trunk card when idle
To disable the indicated IP trunk card when idle in LD 32, use the following
command:
DISI l s c Disable the indicated IP trunk card
when idle, where:
l = loop, s = shelf, c = card
Enable an indicated IP trunk card
To enable an indicated IP trunk card in LD 32, use the following command:
ENLC l s c Enable the indicated IP trunk card,
where:
l = loop, s = shelf, c = card
Disable an indicated IP trunk card port
To disable an indicated IP trunk card port in LD 32, use the following
command:
DISU l s c u Disable the indicated IP Trunk 3.01
(and later) unit (port), where:
l = loop, s = shelf,
c = card, u = unit
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.