Hardware components for ip trunk 3.01 (and later) – Nortel Networks NN43001-563 User Manual
Page 34
34
System description
Hardware components for IP Trunk 3.01 (and later)
New installations use the Media Card 32-port trunk card.
components for the Media Card 32-port trunk" (page 34)
lists the hardware
components required for new installations.
Table 3
Hardware components for the Media Card 32-port trunk
Component
Product code
The package includes the following:
•
NTVQ90 – Media Card 32-port trunk card
•
NTVQ83 ITG EMC Shielding Kit
•
NTAG81 PC Maintenance cable
•
NTAK19 Shielded 4-port SDI/DCH cable for NTAK02 card
•
NTND26 DCHI Interface cable for MSDL
•
NTCW84 Meridian 1 Backplane to 50-pin I/O Panel Mounting
connector with IP Trunk-specific filtering
•
50-pin I/O connector – A0852632
•
NTVQ80 DCHIP kit for Media Card 32-port trunk card which
includes the following;
— NTWE07 C7LIU D-Channel PC Card
— NTMF29 DCHIP to SDI card assembly cable
— NTWE04 Inter Cabinet cable (1 ft)
— Support Bracket Retaining Cable and screws
•
NTMF405 IP Trunk 3.01 (and later)/Voice Gateway Compact
Flash
•
Shielded 50-pin key telephone to 9D Sun and Twin RJ-45
Adapter
•
NTVQ61 IP Trunk 3.01 (and later) NTP CD-ROM – Multilingual
NTVQ91BA
IP Trunks with the D-Channel PC Card kit require NTAK11xD Cabinets or
the Cabinet Upgrade Kit NTDK18AA.
For extra components, such as longer cables required for a Large System,
see
Table 4 "Extra components for IP Trunk 3.01 (and later) trunk cards"
, which lists all extra components used by both IP trunk cards. See
Appendix "Patches and advisements" (page 429)
for more information on
some of the cables and connections.
TM 3.1 is a prerequisite and must be ordered separately.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563
01.01
Standard
Release 5.0
30 May 2007
Copyright © 2007, Nortel Networks
.