Nortel Networks NN43001-563 - Manual (Page 201)

Install filter and NTND26 cable (for MSDL and DCHIP cards in same Large System equipment
row) 201
4 Connect the appropriate NTND26 cable assembly to the D-Channel
port connector on the faceplate of the MSDL card and to the inward
side of the 15-pin filter connector installed in the I/O panel of the
IPE Module that contains the DCHIP card (see
Figure 39 "NTND26
cable routing diagram" (page 201) ).
Figure 38
15-pin filter connector installation
Figure 39
NTND26 cable routing diagram
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.