Nortel Networks NN43001-563 User Manual

Page 227

Configure IP Trunk 3.01 (and later) data

227

Prompt

Response

Description

CHID

xxx

First Channel ID for unit 0 on this IP trunk card,
where:
xxx = 1 - 382 for the ITG-Pentium 24-port trunk card and
the Media Card 32-port trunk card

Standard First CHID Configuration (24-port and 32-port):
Leader 0: - 1
Leader 1: - 25 (24-port card) or 33 (32-port card)
Follower: - 49 (24-port card) or 65 (32-port card)
Follower: - 73 (24-port card) or 97 (32-port card)
Follower: - 97 (24-port card) or 129 (32-port card)
Follower: - 121 (24-port card) or 161 (32-port card)

For nodes containing a mixture of 24-port and 32-port IP
trunk cards, determine the starting CHID by adding the
number of channels (ports) on the previous card to the
CHID of the previous card.

Example:
Leader 0: - 1 (24-port card)
Leader 1: - 25 (1 + 24) (32-port card)
Follower: - 57 (25 + 32) (32-port card)

The same First CHID must be entered in TM 3.1 (and later)
ITG ISDN IP Trunk Node Properties, Card Configuration,
"First CHID" field for this card. If this is not done, the trunk
unit seized by the core switch does not match the trunk
unit seized on the IP trunk card and the calls fall.

The standard First CHID matches the trunk route
member number for the trunk unit 0 in order to facilitate
administration and maintenance.

...

STRI

WNK

Start Arrangement Incoming.
Wink Start is preferred for IP Trunk 3.01 (and later).

STRO

WNK

Start Arrangement Outgoing.
Wink Start is preferred for IP Trunk 3.01 (and later).

SUPN

YES

Answer supervision is required.

CLS

(NHFD)/NHFA

(Deny)/Allow the Trunk Hook Flash feature over 911P
trunks.

Nortel Communication Server 1000

IP Trunk Fundamentals

NN43001-563

01.01

Standard

Release 5.0

30 May 2007