For ip trunk 3.01 (and later) – Nortel Networks NN43001-563 User Manual
Page 219
![background image](/manuals/194294/219/background.png)
Configure IP Trunk 3.01 (and later) data
219
Prompt
Response
Description
SIDE
(USR)
Meridian 1 Option 11C Cabinet/CS 1000M Cabinet
SDI/DCH card acts as User side of ISL.
The DCHIP card acts as the Network side of ISL.
RLS
25
Release ID of PBX at the far end of the D-Channel. If the
far end has an incompatible release, it prevents sending
of application messages.
RCAP
ND2
Network Name Display type signalling. All nodes must
use same RCAP.
...
Configure the ISL D-channel on the Meridian 1/CS 1000M for the DCHIP
card for IP Trunk 3.01 (and later)
Because IP Peer Networking do not support QSIG, only the MCDN protocol
(SL1) is supported. Use LD 17 to configure the ISL D-channel for the DCHIP
card for Large and Small Systems.
LD 17 Configure the ISL D-channel for the DCHIP card (Large and Small Systems)
Prompt
Response
Description
REQ
NEW
Add new data.
TYPE
ADAN
Type of Data Block
ADAN
NEW DCH x
Action Device and Number
CTYP
DCHI
Card Type – Meridian 1 PBX 11C Cabinet/CS 1000M
Cabinet and Meridian 1 PBX 11C Chassis/CS 1000M
Chassis. Optional for Large Systems.
Card Type – recommended for all other systems
MSDL
GRP
x
Network Group number = 0 – 4. Applies to Meridian 1
PBX 81C CP PII/CS 1000M MG without Fiber Network
Fabric (FNF) only.
Network Group number = 0 – 7. Applies to Meridian 1
PBX 81C CP PII/CS 1000M MG with FNF only
DNUM
xx
Device Number for I/O ports= 0 – 15.
Applies to MSDL cards only.
CDNO
xx
Card Number where DCHI resides for Small System and
Media Gateway 1000B.
PORT
x
Port number = 0 – 3 for MSDL card
= 1 or 3 for DCHI on Meridian 1 PBX 11C Chassis/CS
1000M Cabinet
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563
01.01
Standard
Release 5.0
30 May 2007
Copyright © 2007, Nortel Networks
.