Nortel Networks NN43001-563 - Manual (Page 368)

368 OA and M using the ITG shell CLI and overlays
—End—
Only one person can use the ITG shell at a time. Any session, local or
Telnet, can be overridden by a second session. The second user receives
a warning before the login and must confirm to complete the login. There
is a 20-minute Telnet shell activity time-out limit.
Telnet to an IP trunk card through the TM 3.1 PC
Follow the steps in Procedure 61 "Telnetting to an IP trunk card through the
OTM PC" (page 368) to Telnet to an IP trunk card through the TM 3.1 PC.
Procedure 61
Telnetting to an IP trunk card through the TM 3.1 PC
Step Action
1 In the TM 3.1 Navigator window select the IP Telephony Gateway
icon from the Services folder.
2 Select a card from the lower portion of the window. Click the right
mouse button. Select Telnet to ITG card (see
Figure 147 "Select
card and open Telnet session" (page 369) ). The PC opens a Telnet
window and automatically connects to the IP trunk card by using the
card Elan network interface IP address.
3 When prompted to login, enter current username and password.
Default is:
VxWorks login: itgadmin
Password: itgadmin
ITG>
Only one person can use the ITG shell at a time. Any session, local
or Telnet, can be overridden by a second session. The second user
receives a warning before the login and must confirm to complete
the login. There is a 20-minute Telnet shell activity time-out limit.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.