Ordering rules and guidelines – Nortel Networks NN43001-563 User Manual

Page 36

System description

Component

Product codes

Backplane to I/O Panel ribbon cable assembly compatible with
NTCW84JA I/O Panel Filter Connector Block with ITG-specific
filtering for 100BaseTX TLAN subnet connection (replaces
NT8D81BA Backplane to I/O Panel ribbon cable assembly
equipped with non-removable Molded Filter Connectors)

NT8D81AA

Documentation

IP Trunk 3.01 (and later) NTP CD-ROM – Multilingual

NTVQ61BA

PC Cards

C7LIU DCH PC Card with Layer 2 DCH Software

NTWE07AA

Ordering rules and guidelines

IP Trunk 3.01 (and later) can be ordered as a VoIP trunk gateway with 32
ports, or as a software upgrade on an existing VoIP trunk gateway on the
Media Card 32-port trunk card or ITG-Pentium 24-port trunk card. One IP
Trunk card in the system must be equipped with a D-Channel PC Card kit.
One kit supports 12 Media Card 32-port trunk or 16 ITG-Pentium 24-port
trunk card with a maximum of 382 total ports.

Ordering rules for an IP Trunk 3.01 (and later) node

Initial configuration of an IP Trunk 3.01 (and later) node requires one
NTVQ01BB IP Trunk 3.01 Small and Large Systems 32-port package
with DCHIP as appropriate for the system. These packages include all
components needed for a single-card node, except for the cables that
provide interface to the MSDL and SDI/DCH cards. The following DCH
interface cables are included:

•

NTND26AA (Large Systems)

•

NTAK19FB and NTWE04AD (Small Systems)

The following packages are required for IP Trunk 3.01 (and later):

•

ISDN Base (ISDN) package 145

•

ISDN Signaling Link (ISL) package 147

TM 3.1 is required and must be ordered separately.

For MSDL and DCHIP cards that reside in the same Large System UEM
equipment row, order:

•

NTND26 MSDL DCH cable in sufficient length to reach from the MSDL
to the I/O Panel of the IPE module that contains the DCHIP

Nortel Communication Server 1000

IP Trunk Fundamentals

NN43001-563

01.01

Standard

Release 5.0

30 May 2007