Install shielded tlan network interface cable, Figure 37 "ntmf94ea elan, For dchip cards – Nortel Networks NN43001-563 User Manual
Page 198: For non-dchip cards
198
Install and configure IP Trunk 3.01 (and later) node
Figure 37
NTMF94EA ELAN, TLAN and serial port cable
—End—
Install shielded TLAN network interface cable
Use Shielded CAT5 cable to connect to the ELAN and TLAN network
interfaces on the NTCW84KA cable. To conduct a ground loop test, refer to
"Prevent ground loops on connection to external customer LAN equipment"
(page 444)
and follow the test procedure.
For DCHIP cards
Connect a shielded CAT5 LAN cable from the TLAN subnet hub to the
RJ-45 coupler on the NTCW84KA TLAN network interface.
For non-DCHIP cards
Connect a shielded CAT5 LAN cable from the TLAN subnet hub to the
RJ-45 coupler on the NTMF94EA TLAN network interface.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563
01.01
Standard
Release 5.0
30 May 2007
Copyright © 2007, Nortel Networks
.