Nortel Networks NN43001-563 - Manual (Page 233)

Configure dialing plans within the corporate network 233
Prompt Response Description
TOD Time of Day Schedule
If required, turn off IP Trunk 3.01 (and later) trunk route
during peak traffic periods on the IP data network.
FRL Facility Restriction Level
Set FRL appropriately to control access to the IP Trunk
3.01 (and later) route.
DMI 0 Do not use a Digit Manipulation table in the RLB entry for
the IP Trunk 3.01 (and later) route.
For ESN translations that are not used for
non-call-associated signalling, digit manipulation can be
defined on the IP Trunk 3.01 (and later) node dialing plan
in the Digits dialed tab.
SBOC Step Back on Congestion.
RRA Re-route all. Enter RRA at the SBOC prompt to enable
Fallback to alternate circuit-switched trunk route
IP Trunk 3.01 (and later) must have SBOC=RRA for QoS fallback to work.
LD 87 Configure the Co-ordinated Dialing Plan (CDP)
Prompt Response Description
REQ NEW Add new data.
CUST xx Customer number as defined in LD 15.
FEAT CDP Coordinated Dialing Plan.
TYPE DSC
TSC Distant Steering Code.
Trunk Steering Code.
...
RLB xx Route List Entry created in LD 86.
LD 90 Configure dialing plan
Prompt Response Description
REQ NEW Add new data.
CUST xx Customer number as defined in LD 15.
FEAT
NET
Feature.
Network translation tables.
TRAN AC1
AC2 Translator.
Access Code 1 (NARS/BARS).
Access Code 2 (NARS).
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.