Nortel Networks NN43001-563 User Manual
Page 402

402
Maintenance
Command
Description
DPTableGet
hostname,
username, password, directory
path, filename
Update the address table on the IP trunk card with the address
table file on the indicated host, account, and path. The
host starts an FTP session with the given parameters and
downloads the file to the flash file system.
Example:
ITG> DPTableGet "ngals042", "anonymous", "guest",
"/dialPlan", "dialingPlan.txt"
configFileGet
hostname,
username, password, directory
path, filename
Update the config.ini file on the IP trunk card with the config.ini
file on the indicated host, account, and path. The configFileGet
task on the host starts an FTP session with the given
parameters and downloads the file to the flash file system.
Example:
ITG> ConfigFileGet "ngals042", "anonymous", "guest",
"/configDir", "config.ini"
bootPFileGet
hostname,
username, password, directory
path, filename
Update the bootptab file on the IP trunk card with the bootptab
file on the indicated host, account, and path. The bootpFileGet
task on the host starts an FTP session with the given
parameters and downloads the file to the flash file system.
Example:
ITG> bootpFileGet "ngals042", "anonymous", "guest",
"/bootpDir", "bootptab"
SNMPConfFileGet
hostname,
username, password, directory
path, filename
Update the SNMP configuration file on the IP trunk card with
the SNMP configuration file on the indicated host, account and
path. The SNMPConfFileGet task on the host starts an FTP
session with the given parameters and downloads the file to
flash file system.
Example:
ITG> SNMPConfFileGet "ngals042", "anonymous", "guest",
"/snmpDir", "agent.cnf"
hostFileGet
hostname,
username, password, directory
path, filename, ITGFileName,
listener
Get any file from the host and does a get through FTP to the
IP trunk card.
ITGFileName is the full path and filename of where the file is
to be placed. The listener parameter indicates which module
to inform of the successful file transfer. It can be set to -1 to
be disabled.
Example:
ITG> hostFileGet "ngals042", "anonymous", "guest",
"/hostfileDir", "hostFile.txt", "/C:ITGFILEDIR/ITGFILE.TXT", -1
currOmFilePut
hostname,
username, password, directory
path, filename
The omFilePut task on the host starts an FTP session with the
given parameters and downloads the IP trunk card’s current
Operational Measurements file to the indicated location on the
host.
Example:
ITG> currOmFilePut "ngals042", "anonymous", "guest",
"/currDir", "omFile"
prevOmFilePut
hostname,
username, password, directory
path, filename
The omFilePut task on the host starts an FTP session with the
given parameters and downloads the IP trunk card’s previous
Operational Measurements file to the indicated location on the
host.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563
01.01
Standard
Release 5.0
30 May 2007
Copyright © 2007, Nortel Networks
.