Enable an indicated ip trunk card port, Display ip trunk card id information, Display ip trunk card status – Nortel Networks NN43001-563 User Manual
Page 385: Display ip trunk card port status

System commands LD 32
385
Enable an indicated IP trunk card port
To enable an indicated IP trunk card port in LD 32, use the following
command:
ENLU l s c u
Enable the indicated IP Trunk 3.01
(and later) unit (port), where:
l = loop, s = shelf, c = card
Display IP trunk card ID information
To display the IP trunk card ID in LD 32, use the following command:
IDC l s c
Display the card ID for the card,
where:
l = loop, s = shelf,
c = card
Display IP trunk card status
To display the status of an indicated IP trunk card in LD 32, use the following
command:
STAT l s c
Display the status of the indicated
IP trunk card, where:
l = loop, s = shelf, c = card
Display IP trunk card port status
To display the status of a port on the IP trunk card in LD 32, use the
following command:
STAT l s c u
Display the status of the indicated
IP Trunk 3.01 (and later) port, where:
l = loop, s = shelf, c = card, u = unit.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563
01.01
Standard
Release 5.0
30 May 2007
Copyright © 2007, Nortel Networks
.